| Step | Action | Yes | No | 
      
       | DEFINITION: On a dry, smooth, flat road, the vehicle has a left or right steering force only during acceleration. 
 
 | 
      
       | 1 
 
 | Did you review the General Description and perform the necessary inspections? 
 
 | Go to 
 
 | Go to
         
          Symptoms - Suspension General Diagnosis 
 
 | 
      
       | 2 
 
 | 
 
          
           
            | 1. | Drive the vehicle on a straight, smooth, flat road. 
 
 |  
          
           
            | 2. | Press the accelerator and determine if any additional steering input is required to maintain a straight ahead direction. 
 
 |  
          
           
            | 3. | Repeat this test with the vehicle traveling in the opposite direction in order to eliminate crosswind effects. Lead/pull caused by unlevel roads and crosswinds are considered normal. 
 
 |  Does the vehicle exhibit torque steer when the accelerator is pressed?
 
 
 | Go to 
 
 | System OK 
 
 | 
      
       | 3 
 
 | 
 
          
           
            | 1. | Drive the vehicle on a straight, smooth, flat road at 64-97 km/h (40-60 mph). 
 
 |  
          
           
            | 2. | Remove your foot from the accelerator. 
 
 |  
          
           
            | 3. | Shift the transmission into NEUTRAL in order to allow the vehicle to coast. 
 
 |  
          
           
            | 4. | Is any additional steering input required to maintain a straight ahead direction. 
 
 |  
          
           
            | 5. | Repeat this test with the vehicle traveling in the opposite direction in order to eliminate crosswind effects. Lead/pull caused by unlevel roads and crosswinds are considered normal. 
 
 |  Does the vehicle direction change when the steering wheel is momentarily released?
 
 
 | Go to
         
          Vehicle Leads/Pulls 
 
 | Go to 
 
 | 
      
       | 4 
 
 | Inspect the front suspension and powertrain mounts for worn or damaged components and repair as necessary. 
 Did you find and correct the condition?
 
 
 | Go to 
 
 | Go to 
 
 | 
      
       | 5 
 
 | Inspect the vehicle trim height. Refer to
         
          Trim Height Inspection
         
         . 
 Did you find and correct the condition?
 
 
 | Go to 
 
 | - 
 
 | 
      
       | 6 
 
 | Drive the vehicle in order to verify the repair. 
 Did you correct the condition?
 
 
 | System OK 
 
 | - 
 
 |