SAAB WIS ONLINE

Adjust Link Replacement (GNC)

Adjust Link Replacement (GNC)



Callout Component Name

Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .


1

Rear Suspension Link Inner Fastener

Refer to Fastener Caution .

Procedure

Apply torque on the nut.

Tighten

150 Nm (111 lb ft)

2

Rear Suspension Link Outer Fastener

Procedure

Install a NEW bolt.

Tighten

150 Nm (111 lb ft) + 60 degrees + 15 degrees

3

Adjust Link


Procedure

1. Use a proper jack stand to load the knuckle when tightening the fasteners.

2. After installation, check the rear alignment. Refer to Wheel Alignment Measurement .