SAAB WIS ONLINE

Stabilizer Shaft Insulator Replacement (GNE)

Stabilizer Shaft Insulator Replacement (GNE)



Callout Component Name

Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. Disconnect the stabilizer links from the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement (GNC) Stabilizer Shaft Link Replacement (GNE) .


1

Stabilizer Shaft Link Fastener (Qty: 2)

Refer to Fastener Caution .

Procedure

Install NEW bolts.

Tighten

22 Nm (16 lb ft) + 30 degrees

2

Stabilizer Shaft Bracket

Procedure

Change one insulator at the time to ensure the right position and angle.

3

Stabilizer Shaft Insulator