SAAB WIS ONLINE

Driver or Passenger Seat Side Inflatable Restraint Module Replacement (6-Way Hybrid, 6-Way Hybrid Sport)

Driver or Passenger Seat Side Inflatable Restraint Module Replacement (6-Way Hybrid, 6-Way Hybrid Sport)

Removal Procedures


1. Refer to SIR Warning .

Disable the SIR system. Refer to SIR Disabling and Enabling .

2. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (8-Way-Power) Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

3. Remove front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

4. Remove driver or passenger seat recliner lever. Refer to Driver or Passenger Seat Recliner Lever Replacement .

5. Remove front seat tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .

6. Remove driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

7. Remove driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

8. Remove front seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Head Restraint Replacement (8-Way Power) .

9. Remove front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

10. Remove the front seat head restraint adjust rod guide. Refer to Front Seat Head Restraint Adjust Rod Guide Replacement (8-Way-Power) Front Seat Head Restraint Adjust Rod Guide Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

11. Clip out the securing (1) of the recliner control shaft (2).


12. Remove the recliner control (1) from the recliner shaft (2). Unhinge the cushion strap (3) at seat frame.


13.
Note

For loosening move the cushion upper and pull from the backrest frame.


Loosen the front seat back cushion at backrest left side (1) and right side (2).


14. Clip out the front seat back cushion vent fan mat (3) of vent fan (4). Pull the cushion (5) in front to surface.

15. Loosen both nuts (1, 2) from the seat side inflatable restraint module (3).


16. Disconnect the wiring harness connector (2) from the seat side inflatable restraint module (1).


17. Disconnect wiring harness connector (1) of the seat back cushion heater.


18. Remove the front seat back cushion with cushion pad (1) from the backrest frame (2).


19. Remove the seat side inflatable restraint module (1) out of the textile straps (2).



Installation Procedures


1. Install the seat side inflatable restraint module (1) to the cushion cover with the textile straps (2).


2. Install the front seat back cushion with cushion pad (1) at the backrest frame (2).


3. Connect the wiring harness connector (1) of the seat back cushion heater.


4.
Note

Proof the correct locking of wiring harness connector (2).


Connect the wiring harness connector (2) to the seat side inflatable restraint module (1).


5. Refer to Fastener Caution .

Position the seat side inflatable restraint module (3) at the backrest frame. Screw both nuts (1, 2) from seat side inflatable restraint module (3) and tighten to 3.25 Nm (29 lb in) .


6. Clip in the front seat back cushion vent fan mat (3) at the vent fan (4). Position the cushion (5).


7. Install the front seat back cushion at backrest left side (1) and right side (2).

8. Install the front seat head restraint adjust rod guide. Refer to Front Seat Head Restraint Adjust Rod Guide Replacement (8-Way-Power) Front Seat Head Restraint Adjust Rod Guide Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

9. Install the front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

10. Install the front seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Head Restraint Replacement (8-Way Power) .

11. Close the cushion at the backrest rear side.

12. Install the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

13. Install the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

14. Install the tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .

15. Install the driver or passenger seat recliner lever. Refer to Driver or Passenger Seat Recliner Lever Replacement .

16. Install the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

17. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (8-Way-Power) Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .