Drivetrain and Front Suspension Frame Insulator Replacement

/ 9-5 (9650) / 2011 / 8. Body / Body / Adjustment/replacement / Drivetrain and Front Suspension Frame Insulator Replacement

Special Tools

•	CH-49289 Centering Adapter, Subframe Body

•	GE-8395212 Strap

•	CH-49384 Press Tool Kit

For equivalent regional tools, refer to Special Tools .

Removal Procedure

1.	Separate the frame from the body approximately 70 mm. Refer to Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNA) Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNB) .

2.	Remove the bushings using a hydraulic press and CH-49384 Press Tool.

Installation Procedure

1.	Locate the front bushings as shown in the picture.

2.	Install the bushings using a hydraulic press and CH-49384 Press Tool.

3.	Install the frame to the body. Refer to Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNA) Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNB)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.