SAAB WIS ONLINE

Rear Compartment Lid Adjustment

Rear Compartment Lid Adjustment



Callout Component Name
1

Rear Compartment Lid

Refer to Fastener Caution .


Procedure

1. Loosen the four rear compartment lid hinge bolts.

2. Adjust the rear compartment lid in order to obtain an even gap on both sides between the rear compartment lid and the quarter outer panel, the rear bumper fascia and the taillamp and so that the rear compartment lid is flush with the quarter outer panel, the rear bumper fascia and the taillamp.



Adjustment

Rear compartment lid to quarter outer panel

(A) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)

Rear compartment to rear bumper fascia

(B) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)

Rear compartment to taillamp

(C) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)


Tighten

22 Nm (16 lb ft)