SAAB WIS ONLINE

Air Inlet Housing Replacement

Air Inlet Housing Replacement

Removal Procedure


1. Remove the Heater and Air Conditioning Evaporator and Blower Module. Refer to Heater and Air Conditioning Evaporator and Blower Module Replacement .

2. Remove the air inlet housing (2) from the heater and air conditioning evaporator and blower module (1).


• Disconnect the electrical connectors.

• Remove the 4 air inlet housing bolts (3).

3. Remove the air inlet valve actuator. Refer to Air Inlet Valve Actuator Replacement (Right Hand Drive) Air Inlet Valve Actuator Replacement (Left Hand Drive) .

4. Remove the air inlet valve and inside air valve control cam. Refer to Air Inlet Valve and Inside Air Valve Control Cam Replacement .


Installation Procedure


1. Install the air inlet valve and inside air valve control cam. Refer to Air Inlet Valve and Inside Air Valve Control Cam Replacement .

2. Install the air inlet valve actuator. Refer to Air Inlet Valve Actuator Replacement (Right Hand Drive) Air Inlet Valve Actuator Replacement (Left Hand Drive) .

3. Refer to Fastener Caution .

Install the air inlet housing (2) to the heater and air conditioning evaporator and blower module (1).


• Connect the electrical connectors.

• Install the 4 inlet housing bolts (3) and tighten to 2.5 Nm (23 lb in) .

4. Install the heater and air conditioning evaporator and the blower module. Refer to Heater and Air Conditioning Evaporator and Blower Module Replacement .