Symptoms - Remote Functions

/ 9-5 (9650) / 2011 / 8. Body / Doors and locks / Fault diagnosis, fault symptoms / Symptoms - Remote Functions

Note

The following steps must be completed before using the symptom tables.

1.	Perform Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:

•

There are no DTCs set.

•

The control modules can communicate via the serial data link.

2.	Review the system operation in order to familiarize yourself with the system functions. Refer to Keyless Entry System Description and Operation (With ATH) Keyless Entry System Description and Operation (Without ATH) .

Visual/Physical Inspection

•	Inspect for aftermarket devices which could affect the operation of the Keyless Entry System. Refer to Checking Aftermarket Accessories .

•	Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

•	Garage Door Opener Malfunction

•	Keyless Entry System Malfunction (with ATH) Keyless Entry System Malfunction (without ATH)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.