SAAB WIS ONLINE

Instrument Panel Tie Bar Replacement

Instrument Panel Tie Bar Replacement



Callout Component Name

Preliminary Procedure

1. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement .

2. Remove both front and rear side door still trim plates. Refer to Front and Rear Side Door Sill Trim Plate Replacement .

3. Remove the steering column. Refer to Steering Column Replacement .

4. Remove the body control module bracket. Refer to Body Control Module Replacement (Right Hand Drive) Body Control Module Replacement (Left Hand Drive) .


1

Instrument Panel Tie Bar Assembly Fastener (Qty: 10)

Refer to Fastener Caution .

Tighten

22 Nm (16 lb ft)

2

Heater and Air Conditioning Evaporator and Blower Module Fastener (Qty: 3)

Procedure

Release the heater and air conditioning evaporator and blower module from the I/P tie bar and secure the module at the body.

Tighten

5 Nm (44 lb in)

3

Instrument Panel Tie Bar Assembly


Procedure

1. Remove the hood release handle.

2. Note location and routing of the I/P wiring harness prior to removal of the I/P tie bar assembly to ensure proper reinstallation.

3. Disconnect the wiring harness from the I/P tie bar assembly.

4. With the aid of an assistant, remove the I/P tie bar assembly from the vehicle.

5. If replacing the I/P tie bar assembly, transfer all necessary components.