SAAB WIS ONLINE

Driver or Passenger Seat Adjuster Memory Module Replacement (8-Way Power)

Driver or Passenger Seat Adjuster Memory Module Replacement (8-Way Power)



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. If a NEW ECM was installed, the ECM must be programmed. Refer to Control Module References .


1

Driver Seat Adjuster Memory Module Fastener (Qty: 4)


Procedure

1. Move the driver or passenger seat full backward.

2. Move the seat in upper position.

3. Turn OFF the ignition.

4. Disconnect the battery.

5. Disconnect the wiring harness connector.


2

Front Seat Adjuster Memory Module