Driver or Passenger Seat Back Cushion Cover Replacement (8-Way-Power)
Driver or Passenger Seat Back Cushion Cover Replacement (8-Way-Power) |
Removal Procedure |
1. |
Refer to
SIR Warning
.
Disable the SIR system. Refer to SIR Disabling and Enabling . |
2. |
Remove the driver or passenger seat. Refer to
Driver or Passenger Seat Replacement (8-Way-Power)
Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|
3. |
Remove the front seat outer adjuster finish cover. Refer to
Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power)
Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|
4. |
Remove driver or passenger seat adjuster finish cover. Refer to
Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport)
Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power)
Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power)
.
|
5. |
Remove driver or passenger seat inner recliner finish cover. Refer to
Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power)
Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|
6. |
Remove the front seat head restraint guide bezel. Refer to
Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
Front Seat Head Restraint Guide Bezel Replacement (8-Way Power)
.
|
7. |
Clip out retaining ring (1) of recliner control shaft (2).
|
8. |
Unhinge the cushion strap (1) from the seat frame.
|
9. |
Release the front seat back cushion from the backrest left side (1) and right side (2).
|
10. |
Release both fasteners (1, 2) from the seat side inflatable restraint module (3).
|
11. |
Disconnect the wiring harness connector (2) from the seat side inflatable restraint module (1).
|
12. |
Remove the front seat back cushion with the cushion pad (1) from the backrest frame (2).
|
13. |
Remove the seat side inflatable restraint module (1) out of the textile straps (2).
|
14. |
Remove the hog rings from the seat cushion (1), pull the cushion cover from the cushion pad (2).
|
Installation Procedure |
1. |
Install the front seat cushion cover to the cushion pad with new hog rings.
|
2. |
Install the seat side inflatable restraint module (1) to the cushion cover with the textile straps (2).
|
3. |
Install the front seat back cushion with the cushion pad (1) to the backrest frame (2).
|
4. |
Connect the wiring harness connector (2) to the seat side inflatable restraint module (1). |
5. |
Refer to
Fastener Caution
.
Position the seat side inflatable restraint module (3) at the backrest frame. Tighten both fasteners (1, 2) to the seat side inflatable restraint module (3). Tighten3,25 Nm (29 lb in) |
6. |
Install the front seat back cushion to the backrest left side (1) and right side (2).
|
7. |
Install the front seat head restraint guide bezel. Refer to
Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
Front Seat Head Restraint Guide Bezel Replacement (8-Way Power)
.
|
8. |
Install the front seat head restraint. Refer to
Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
Driver or Passenger Seat Head Restraint Replacement (8-Way Power)
.
|
9. |
Close the cushion at the backrest rear side.
|
10. |
Install the driver or passenger seat inner recliner finish cover. Refer to
Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power)
Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|
11. |
Install the driver or passenger seat adjuster finish cover. Refer to
Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport)
Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power)
Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power)
.
|
12. |
Install the front seat outer adjuster finish cover. Refer to
Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power)
Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|
13. |
Install driver or passenger seat. Refer to
Driver or Passenger Seat Replacement (8-Way-Power)
Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport)
.
|