SAAB WIS ONLINE

Driver or Passenger Seat Lumbar Support Replacement (Driver/Passenger Seat Manual Lumbar)

Driver or Passenger Seat Lumbar Support Replacement (Driver/Passenger Seat Manual Lumbar)



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (8-Way-Power) Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .

3. Remove front seat back cushion pad. Refer to Front Seat Back Cushion Pad Replacement (8-Way-Power) Front Seat Back Cushion Pad Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) .


1

Front Seat Lumbar Support Retainer (Qty: 10)


Procedure

1. Release the lumbar pump.

2. Disconnect the wiring harness connector from the lumbar pump.

3. Disconnect the wiring harness connector from the lumbar distributor.

4. Disconnect the wiring harness connector from the vent fan.

5. Cut cable straps.

6. Release the lumbar at backrest frame.

7. Remove lumbar assembly from backrest.


2

Front Seat Lumbar Support