Valve gear
| Valve gear |
| 1. |
Exhaust valve
|
|
| 1. |
Inlet valve
|
|
| Important | ||
|
The exhaust valves are stellited and should therefore not be machined. Grinding with valve-grinding (lapping) paste is the only recommended method. |
||
| Valve guides |
|
Length
|
mm
|
42.5
|
|
Outside diameter
|
mm
|
12.039 - 12.050
|
|
Bore for valve guides
|
mm
|
12.000 - 12.018
|
|
Maximum clearance between valve stem and valve guide
|
mm
|
0.50 (Measured on valve head raised 3 mm above seat.)
|
| Valve springs |
|
Length,
|
fitted
|
mm
|
37.0
|
|
|
free
|
mm
|
44.0 - 47.0
|
|
|
when subjected to compressive force of 620 - 670 N
(138 - 150 lbf) |
mm
|
28.4
|
| Cam followers |
|
Diameter
|
mm
|
32.959 - 32.975
|
|
Height
|
mm
|
26.0
|
|
Bore for cam followers
|
mm
|
33.000 - 33.016
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
