Fuel filter
Fuel filter |
|
• |
Work only in a well-ventilated area.
If approved equipment for the
extraction of fuel vapour is available, be sure to use it.
|
• |
Wear suitable gloves. Prolonged contact with fuel may give rise to skin
irritation or dermatitis.
|
• |
Keep a class BE fire extinguisher near at hand. Be mindful of the
danger of sparks caused by short-circuits and when connecting and
disconnecting leads, etc. in electrical circuits.
|
• |
No smoking anywhere in the vicinity.
|
To remove |
1. |
Drain all fuel from the filter
before removing it.
|
2. |
Undo the banjo fittings on both sides of the filter.
|
3. |
Undo the filter clamp.
|
4. |
Remove the filter.
|
To fit |
Fit in reverse order.
Tightening torque for banjo fittings:
21 Nm (16 lbf ft)
Important | ||
Fit new sealing washers before fitting. |
||