TCS OFF warning lamp
| TCS OFF warning lamp |
| TCS OFF warning lamp |
When the ignition switch is turned to the Drive position the warning lamp lights up for three seconds.
The warning lamp remains on in the event of a system fault and is caused to light up by the control module grounding the lamp circuit on pin 26.
The warning lamp also lights up when the system is disconnected manually, which can be done at speeds lower than 60 km/h by pressing the TCS switch. The system can be engaged at any speed by pressing the TCS switch. The TCS OFF lamp will then go out again.
If ON lights up in connection with starting, the system is always engaged automatically.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
