Fog-light alignment
Fog-light alignment |
1. |
Measure the distance between
the centre of the lens and the
floor.
Mark the wall (at 90° to the headlamp lens) with a cross at the same height. |
2. |
Switch on the fog lights.
|
3. |
Turn the adjusting screw until the light is:
|
• |
(for the US market) about 1.3%%of the distance
between the car and
the wall (e.g. 13 cm below the cross if the distance between car and
wall is 10 metres)
|
• |
(for other markets) about 1-2%%of the distance between the car and the
wall (e.g. 10-20 cm below the cross if the distance between car and
wall is 10 metres)
angled downwards below the horizontal line of the
cross.
|