SAAB WIS ONLINE

Moisture in the front direction indicatorlamps

MODIFICATION INSTRUCTION
Bulletin Nbr: 351-1447
Date: ........... JANUARIĀ 1994
Market: EJ USA, CA
Moisture in the front direction indicator lamps


Cars concerned

All M94 Saab 900 models with a chassis number between R2000565 and R2006296, inclusive.

Background

Moisture can enter the front direction indicators through the ventilation openings at the bottom of the lamps.

Materials

(10) 92 88 127 Butyl tape (about 70 mm per lamp required)

Standard time information

See separate information.

Marking of the modification identity plate

When the car has been remedied, the modification identity plate should be stamped in box "B2". If remedial action has been carried out by the importer, a figure "7" should be stamped in the plate. If done by a dealer, the plate should be stamped with a figure "8".

Procedure


1. Remove the front direction indicator lamps. (If moisture is present in the lamps, remove the bulb and leave the lamp to dry out.)

2. Remove the T-piece at the bottom of the lamp.

3. Apply butyl tape on the T-piece and refit it.

4. Apply butyl tape to the prevent moisture from entering the lamp.


Important

Make sure that the edge of the butyl tape is not lower than the edge of the lamp.


5. Refit the lamps.