Lighting for instruments and controls

/ 900 / 1994 / 3. Electrical system / Lighting and signalling system / Fault diagnosis on basis of fault symptoms / Lighting for instruments and controls

1.	Check that fuse 29 is intact and live with current.

2.	Check that current is present on pin 7 of the rheostat.

3.	Check that a PWM signal is present on pins 2, 3, 5 and 9 of the rheostat and that the electrical connections and grounding of every component are satisfactory.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.