Extra fog lights
| Extra fog lights |
The ICE control module controls the front fog lights and, depending on the market variant for which the ICE control module is programmed, it grounds the fog light relay via pin 55 when current is present on pin 17.
When lights switch 10 is in position 0 (daylight driving lights), position 1 (parking lights) or position 2 (main or dipped beam headlamps), a positive voltage is applied to pin 5 of switch 88 for the extra fog lights via fuse 30 (which also supplies the parking lights with current).
When switch 88 is pressed, the ICE control module grounds relay 107 and the lamp built into the switch lights up at full strength. When the switch is not activated the lamp is supplied with current from rheostat 16 for the instrument lighting.
When the relay is energized, both fog lights 85 receive current via fuse 2 from the closed relay contacts.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
