Replacement of control module
| Replacement of control module |
| 1. |
Lift up the front seat to its highest position and remove the sill scuff plate.
|
|
| 2. |
3-D
: Remove the bolt for the seatbelt located on the floor. Lift up the mat just in front of the B-pillar to access the control module.
|
|
| 3. |
Remove the two plastic nuts securing the control module and remove the control module.
|
|
| 4. |
Unplug the connectors for the control module. Fit in the reverse order.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
