Replacement of rear window washerhose
Replacement of rear window washer hose |
To remove |
1. |
Remove the screws securing
the speaker grille and luggage
compartment side trim as well as the C-pillar trim.
|
2. |
Detach the soft hose from the hard hose.
|
3. |
Turn the washer nozzle on the tailgate a quarter-
turn to remove it.
|
4. |
Remove the hose from the clips on the C pillar.
|
5. |
Remove the rubber grommet in the tailgate and withdraw the
hose.
|
To fit |
1. |
Start by running the hose from
the luggage compartment out to the
tailgate.
|
2. |
Insert the hose through the rear roof mounting and then out through
the rubber grommet.
|
3. |
Insert the hose into the tailgate.
Use a pair of long-nose pliers to withdraw the hose and then fit it onto the nozzle. |
4. |
Make sure the hose is run neatly and evenly up to the tailgate without
any tautness.
|
5. |
Fit the hose in the clips on the C pillar.
Then fit in reverse order. |