SAAB WIS ONLINE

Washer fluidlevel indicator lamp always on

SERVICE INFORMATION
Bulletin Nbr: 381-1530
Date: ........... JUNIĀ 1994
Market: ALL
Washer fluid level indicator lamp always on


Cars concerned

Saab 900 between chassis numbers R2035110 and R2037114 with 2.0 liter engine and side instrument 1.

Background

In cars with these chassis numbers, the low washer fluid indicator lamp can light constantly despite the washer fluid reservoir being filled. The reason is that an extra cable has been erroneously fitted between the side instrument and the main instrument.

These cars should not have any washer fluid warning.

Procedure


1. Transport fuse (Maxifuse 1) must be fitted in order to conduct a test.

2. Top up the washer fluid and switch on the ignition.

3. Check if the low washer fluid level indicator lights in the main instrument. Switch off the ignition.

4. If the lamp lights, remove the side instrument (2 M4 screws).

5. Clip the RD/WH cable to pin 13 as near to the connector as possible.


Important

The cable to pin 15 is also RD/WH. Cut the correct one as illustrated.


6. Fold the excess cable into the casing.

7. Switch on the ignition and make sure that the indicator lamp does not light.

8. Switch off the ignition and fit the side instrument.


Standard time information

Object code: 37156

DTC: 67

Localization code: 09

Action code: 05

Time: 0.1 hours

Warranty information

Regular warranty rules apply.