SAAB WIS ONLINE

Symbols used in the wiring diagrams

Symbols used in the wiring diagrams

Fuses


Each function on the wiring diagram is normally illustrated from the fuse in question out to the respective component/s and on to the grounding point/chassis connection.

The power supply to each fuse is illustrated separately in the system group for the positive supply in which the main fuse box, ignition switch, etc. are covered.

Example:

The supply to a fuse comes from the +30 terminal block and can be seen up to the fuse in question in the section "Voltage +30"

Grounding points


Most of the grounding points in the car have a component number comprising a letter and a number, e.g. G2 or G29. The location of the grounding points can be found in the section "Grounding points".

Switches, relays and components

Switches and relays are drawn in a neutral or inactive state respectively unless otherwise stated. The component is shown in full if the box around it is drawn with an unbroken line.

When the box around the component is drawn with a broken line, only part of the component is shown.

Crimped connections


To reduce the number of connectors in the car, there are a number of crimped connections. They are illustrated in the wiring diagrams like the adjacent example.