Checking the "stalling" speed
|
Checking the "stalling" speed
|
Important
Important
|
This test must not be carried out for longer than 5 seconds! It is not recommended for turbo variants.
|
|
The test indicates the general condition of the engine and transmission by checking the max. engine speed in positions D and R.
Checking the "stalling" speed:
1.
|
Chock all four wheels on the car.
|
2.
|
Apply the handbrake fully.
|
3.
|
Press the brake pedal hard.
|
4.
|
Start the engine and move the selector lever to position D.
|
5.
|
Fully depress the accelerator and quickly read off the highest engine speed. The "stalling" speed should be:
B258i:
2150 ± 150 rpm.
B234i:
2300 ± 150 rpm.
B204L:
2325 ± 150 rpm.
|
6.
|
Repeat the test with the selector lever in position R. Stalling speed should be the same as above.
|