Adaptation of slip point
Adaptation of slip point |
It is extremely important to bleed the clutch properly before adapting the slip point, see

2. |
Drive the car for at least 4 minutes and change gear frequently. Do not switch off the engine.
![]() |
3. |
Stop the car and put the gear lever in neutral.
![]() |
4. |
Wait 20 seconds without touching the gear lever or accelerator.
![]() |
5. |
Engage 1st gear and drive the car a few metres.
![]() |
6. |
Repeat points 3-5 twice again.
|
7. |
Take the car on a test drive.
|