“READ ON/OFF" command menu


+50 in ON/OFF	Power (+50 circuit) supplied to the control module via control module, anti-theft alarm or directly via the ignition switch. ON = B+, OFF = 0 V
BRAKE LIGHT SWITCH ON/OFF	Shows activation of the brake lights switch. The system utilizes the breaking function of the brake lights switch. When depressed, the brake pedal closes the contacts of the brake lights switch.
BRAKE PEDAL SWITCH ON/OFF	Shows activation of the brake pedal switch. The brake pedal switch and brake lights switch operate in parallel. Depressing the brake pedal opens the contacts in the brake pedal switch. This should be tested with the ignition switch in the ON position and a gear engaged.
CRUISE CONTROL ON/OFF	Activation of the car's Cruise Control system is displayed.
ACS LAMP ON/OFF	The warning lamp lights up and stays on in the event of a system fault. The control module grounds the lamp circuit. Ground (0 V) results in ON.
STARTING RELAY +50 ON/OFF	Not implemented.
ENGINE TURN-OFF ON/OFF	The possibility of "killing" the engine is provided by this command. Status is displayed.
DISENG CRUISE CONTROL ON/OFF	The system sends a signal to the cruise control system informing it that gear changing is taking place. Status is shown.
CLUTCH ACTUATOR ON/OFF	The control module can engage and disengage the actuator motor driver stage, which normally occurs when the clutch is fully engaged. Status is shown.