Control module
| Control module |
| Removal |
| 1. |
Remove the
cover.
|
|
| 2. |
Unplug the 4-pin and 6-pin connectors and the other connector.
|
|
| 3. |
Undo the six control module retaining screws and lift the control module away
from the ABS hydraulic unit.
|
|
| Fitting |
| 1. |
Fit the new control module for
the ABS hydraulic unit and tighten the six retaining screws.
|
|
| 2. |
Plug in the 6-pin and 4-pin connectors and the other connector.
|
|
| 3. |
Fit the cover in place.
|
|
| 4. |
Start the car and check that the warning lamps go out.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
