SAAB WIS ONLINE

Wheel sensors, front

Wheel sensors, front


Removal


1. Raise the car and remove the wheel.

2. Clean the area round the wheel sensor using a soft wire brush.

3. Undo the wheel sensor retaining screw and remove the wheel sensor.

4. Remove the sensor cable from the holder in the wheel housing and unplug the connector.


Fitting



1. Plug in the wheel sensor's connector.

2. Fit the sensor cable and connector in their respective holders.

3. Fit the wheel sensor in its holder and tighten the retaining screw.

4. Fit the wheel and lower the car to the floor.