Description of operation, controlmodule
Description of operation, control module |
A main relay
The main relay is a part of the control module and supplies the solenoid valves and pump relay with current. The main relay cannot be replaced separately.
A pump relay
The pump relay is a part of the control module and supplies the return pump with current. The pump relay cannot be replaced separately.
4-pin connector
The 4-pin connector supplies the ABS unit with current from fuses 22 (+30 circuit) and 19 (+15 circuit) and connects it to ground at grounding point G30. The fourth pin connects the ABS (ANTI LOCK) warning lamp to ground as necessary.
6-pin connector
The 6-pin connector supplies the control module with current and connects the three valves to ground.
Pins 1 and 2 = LH front, 3 and 4 = RH front, 5 and 6 = rear.