Rear damper
Rear damper |
To remove |
1. |
Cut out a flap in the luggage
compartment carpeting to gain access
to the damper's upper mounting.
|
2. |
Remove the nut, washer and bush from damper's upper mounting point.
|
3. |
Raise the car and remove the rear wheel.
|
4. |
Remove the retaining bolt in the damper's lower mounting. Lift out the
damper.
|
To fit |
1. |
Insert the damper's upper
mounting through the hole in the body.
|
2. |
Tighten the retaining bolt in the damper's lower mounting.
Tightening torque: 62 Nm (45.8 lbf ft) |
3. |
Fit the wheel.
|
4. |
Lower the car to the floor.
|
5. |
Tighten the wheel bolts.
Tightening torques: 105-130 Nm (78-96 lbf ft) light alloy wheel 90-105 Nm (67-78 lbf ft) pressed steel wheel |
6. |
Fit the bush, washer and nut on the upper mounting.
Tightening torque: 20 Nm (14.8 lbf ft) |
7. |
Press back the flap in the luggage compartment trim and restore the
luggage compartment to its original condition.
|