Replacing the rubber bush in the reardampers.
Replacing the rubber bush in the rear dampers. |
1. |
Remove the
damper.
|
2. |
Place the damper, an 18 mm socket and special tool 89 96 720 in a
press.
|
3. |
Press out the bush (see picture).
|
To fit |
1. |
Lubricate the bush and
compression tool, if used, with petroleum
jelly (Vaseline) or the like.
|
2. |
Press in the compressed bush, using special tool 89 96 720 as a dolly
(see lower picture).
|
3. |
Fit the damper.
|