SAAB WIS ONLINE

Steering wheel centre pad (airbagmodule):

Steering wheel centre pad (airbag module):

Removal

Warning

Read the Safety and handling instructions before starting work.



1. Remove the negative lead from the battery.

2. Remove the bolts that secure the steering wheel airbag (A).

3. Lift out the steering wheel airbag and disconnect the electric connection (B).


Fitting


1. Plug the connector into the back of the steering wheel airbag (B).

2. Tighten the bolts that secure the steering wheel airbag (A).

3. Connect the negative battery lead.

4. Connect the ISAT to the data link connector under the facia and erase any diagnostic trouble codes.

5. Start the engine and check that the SRS lamp comes on for about 3-4 seconds and then goes out.