B1615
| B1615 |
| Detonator circuit activated |
If the SRS lamp keeps on flashing without changing to a continuous light, the control module is unserviceable.
| 1. |
Switch on the ignition and clear the diagnostic
trouble code. Switch the ignition off and on again, wait for at least 40 seconds and then check
to see whether the diagnostic trouble code recurs.
If the diagnostic trouble code recurs, try fitting a new control module that is known to be OK. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
