SAAB WIS ONLINE

Reinforcement

Reinforcement


The body is reinforced in the areas that are most exposed to strain in the event of an accident. Some of this reinforcement is also made of High-strength steel. The circled areas are especially exposed and require extra accuracy in the event of bodywork repairs.


1. Outside of front wheel housing

2. Lower part of A pillar

3. Upper part of A pillar

4. Junction plate on inside of A pillar

5. Door sill

6. Bulkhead in door sill

7. B pillar

8. Upper part of side panel

Important

Body reinforcement components should be cut and joined only if they are specifically covered in the description of methods. Unless otherwise stated, a damaged reinforcement component must be discarded and a new one fitted in its place. This is mandatory.