Replacement of tailgate lock cylinder
|
|
Replacement of tailgate lock cylinder
|
|
2.
|
Remove the trim. See Service Manual 8:2 "Interior equipment"
.
|
|
3.
|
Detach the rod from the lock cylinder (secured by a clip) and let it hang
down.
|
|
4.
|
Remove the microswitch from the lock cylinder (secured by a clip).
|
|
5.
|
Remove the two lock cylinder retaining nuts.
|
|
6.
|
Remove the lock cylinder by pulling it inwards.
Lock cylinder
|
|
7.
|
Insert the key in the lock cylinder.
|
|
8.
|
Remove the locking washer securing the driver to the lock
cylinder.
|
|
9.
|
Remove the driver and spring from the lock cylinder.
|
|
10.
|
Press out the lock cylinder.
|
Fit in reverse order.
|
Note
|
|
Make sure that the sealing inside the door is properly fitted before
inserting the cylinder.
|
|
The lock cylinder should be fitted with the drain hole at the bottom,
facing downwards.
|
