Outer sill scuff plate, three-doorcars
|
|
Outer sill scuff plate, three-door
cars
|
|
1.
|
Remove the splash guard.
|
|
2.
|
Remove the sill moulding.
|
|
3.
|
Unscrew the plastic nuts securing the sill scuff plate.
|
|
4.
|
Remove the front sill scuff plate from the weld screws.
|
|
5.
|
Remove the rear sill scuff plate from the weld screws. Pull it
rearwards away from the guides at the top edge.
|
|
1.
|
Refit the sill scuff plate by
pushing it onto the guides at the top
edge and then pressing the plastic nuts into place.
|
|
2.
|
Introduce the front sill scuff plate into the wheel housing and fit it
in place over the weld screws.
|
|
3.
|
Screw on the plastic nuts.
|
|
4.
|
Refit the lower moulding.
|
|
5.
|
Refit the splash guard.
|
