SAAB WIS ONLINE

Backrest upholstery, rear seat

Backrest upholstery, rear seat

To remove


Centre armrest




1. Press out the sides of the backrest hatch at the sides of the armrest so that the spindles holding the armrest at the sides come free. Loosen one side at a time.

2. Place the armrest on a workbench.

3. Remove the upholstery. To do this, undo the fastening at the rear and pull the upholstery off the armrest.

Backrest



4. Remove the entire backrest, and .


5. Place the backrest on a workbench, rear side facing upwards.

40%% section: Remove the locking clamp and pivot.

60%% section: Remove the pivot.

6. Detach the upholstery with padding from the lower section. To do this, lift up the retaining strip all the way round and remove the upholstery with padding.

7. Loosen the upholstery by cutting through the staples.


To fit

Note

Fit in reverse order. Fasten the upholstery to the padding by means of staples using the tool supplied with assembly kit, .