SAAB WIS ONLINE

Pre-delivery service

Pre-delivery service


1. Washer fluid, top up.

2. Insert main fuse No. 1 in the main fuse box.

3. Program the anti-theft alarm. Affix anti-theft alarm labels.

4. OBD II specification cars: connect an ISAT scan tool and clear any diagnostic trouble codes in the engine and automatic transmission management systems.

5. Saab Information Display: set the clock, program the SID.

6. Program the ACC and radio anti-theft code.

7. Check operation of wash-wipe systems.

8. Tyre pressures, check and adjust.

9. Wheel bolts, tighten with prescribed torque.

10. Check oil and fluid levels, inspect for leaks, top up. Engine, automatic transmission and power steering.

11. Check coolant and fluid level, inspect for leaks, top up as necessary. Cooling system, brake and clutch systems.

12. Turbo: Plug the electric lead into the boost pressure control valve.

13. Raise the car and inspect the underbody for transit damage. Note that the corrosion protection (underseal) should also be intact.


Important

Do not jack up the rear end of the car or the rear axle.


14. Brake disc transit protection, remove.

15. Retighten the rear axle mounting.

16. Fit the cover panel in the spoiler. Put the tools in place and fit the supplied equipment.

17. Cars for the European market, M1997: Certificate of Conformity".

18. Road test

19. . OBD II specification car: Connect an ISAT scan tool and check that no new diagnostic trouble codes have been detected in the engine and automatic transmission management systems after the road test.

20. Cleaning