SAAB WIS ONLINE

Engine oil change

Engine oil change


Oil volume

B204, B206, B234: 4.0 litres (4.2 qts), including filter B258: 4.5 litres (4.7 qts), including filter.

Grade of oil

Saab Turbo motor oil or motor oil to API SG and CCMC G4/G5 specification at least. These oils contain suitable additives for the engine.

We advise against the use of additional additives.

In countries in which the temperature never falls below +15-20 ° C, use oil with a viscosity of 15W-50 or 20W-50.

If 5W oils are used, they must be of fully-synthetic or semi-synthetic type.

In markets where the only 5W oil obtainable is of mineral type, such oil may be used provided that it meets the standards of quality specified above.


Drain plug

Tightening torque:

B204, B206, B234: 25 Nm (18.5 lbf ft)

B258: 55 Nm (41 lbf ft)

Oil filter change



Loosen the filter cartridge using a filter wrench and unscrew the filter. Wipe the mating surface on the engine clean.

Oil the rubber gasket on the new filter cartridge and screw the cartridge in place.


Tightening torque: 10 Nm (7.4 lbf ft)

Warning

Make sure that the filler cap (1) is screwed down hard after topping up with oil. Oil on the exhaust manifold could cause a fire.



Start the engine and check the filter (2) for leaks.