Lubricating system
Lubricating system |
General data |
Oil capacity, dry engine, incl. filter
|
without oil cooler
|
litres
|
5.0
|
|
with oil cooler
|
litres
|
5.4
|
Oil capacity at oil change
|
when servicing
|
litres
|
4.0
|
Volume between MAX and MIN marks on dipstick
|
|
litres
|
1.0
|
Grade of oil
|
|
|
Saab Turbo motor oil or motor oil to API SG and CCMC G4/G5 specification.
|
Viscosity
|
|
|
SAE 10W30 or 10W40. In markets where these viscosities are unobtainable 15W40 may be used instead, although not in winter. Use 5W30 or 5W40 oil in climates with temperatures regularly below -20C (-4F). In climates with a constant temperature of +15C or above, use 15W50 or 20W50 oil of synthetic or synthetic-based type.
|
Important | ||
The grades of oil recommended above contain all necessary additives and the use of additional additives should therefore be avoided. |
||
Oil pressures |
Oil pump reducing valve opens at
|
bar
|
3.8
|
Warning lamp comes on at
|
bar
|
0.3 - 0.5
|
Oil pressure at 2000 rpm, engine warmed up
(80°C/176°F) and 10W30 oil, minimum |
bar
|
2.7
|
End float between pump rotor and housing
|
mm
|
0.03 - 0.08
|
Engine oil cooler thermostat opens at
|
C (F)
|
80 (176)
|