SAAB WIS ONLINE

Engine suspension, front

Engine suspension, front

To remove



1. Raise the car and remove the front wheel on the side where the engine mounting is to be replaced.

2. Remove the wing liner and spoiler section and place a jack under the engine or gearbox.

3. Undo the bolts securing the engine mounting to the body.

4. Lower the engine slightly and unbolt the engine mounting from the bracket.


To fit



1. Bolt the engine mounting to the bracket.

Important

Do not forget the rubber spacer between the gearbox fastening and the engine mounting, if one was fitted.


Tightening torque 39 Nm (29 lbf ft).

2. Raise the engine and tighten the engine mounting to the body. Remove the jack.

Tightening torque 73 Nm (54 lbf ft).

3. Fit the spoiler section and wing liner.

4. Refit the wheel and tighten the bolts.

Tightening torques

110 Nm (81 lbf ft)

5. Lower the car to the floor.