Replacement of secondary air control valve
| Replacement of secondary air control valve |
| 1. |
Lift up the engine compartment's sealing strip from the upper part of the bulkhead wall.
|
|
| 2. |
Undo the securing clamp and lift up the valve.
|
|
| 3. |
Disconnect the control unit and the two hoses to the valve, remove the valve.
|
|
| 4. |
Connect the hoses and the control unit to the new valve.
|
|
| 5. |
Fit the valve and tighten the securing clamp.
|
|
| 6. |
Refit the sealing strip to the upper part of the bulkhead wall.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
