Injectors
Injectors |
To remove |
1. |
Remove the resonator (air
silencer).
|
2. |
Disconnect the crankcase breather hose and remove the IAC
valve with hoses.
|
3. |
Remove the bracket for the dipstick as well as the throttle
and Cruise Control cables.
|
4. |
Remove the four retaining screws, two at either end of the
fuel injection manifold, and the two screws securing the
cable conduit.
|
5. |
Carefully lift up the fuel injection manifold.
|
6. |
Remove the two protective rails and unplug the connectors
from the injectors.
|
7. |
Remove the locking clips securing the injectors to the fuel
injection manifold and withdraw the injectors.
|
To fit |
Fit in reverse order.
Note | ||
Lubricate the O-rings with petroleum jelly (Vaseline) to facilitate reassembly. |
Important | ||
Check that the connectors on the injectors are correctly fitted. Then carefully press the fuel injection manifold in place. |
||