Secondary air injection, pump andfilter
| Secondary air injection, pump and filter |
| To remove |
| 1. |
Remove the lower section and
the lower half on the left-hand
side of the spoiler.
|
|
| 2. |
Remove the three retaining bolts, unplug the connector and
disconnect the hoses from the pump.
|
|
| 3. |
Lift the pump away.
|
|
| 4. |
Remove the filter retaining bolt and remove the filter with
hose.
|
|
| To fit |
Fit in reverse order.
| Note | ||
|
The arrow on the valve should point in the direction of the air flow. Secondary air injection, vacuum valve |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
