Mass air flow sensor and temperature sensor,intake air
|
Mass air flow sensor and temperature sensor,
intake air
|
Intake air temperature sensor
|
1.
|
Unplug the
connector.
|
2.
|
Remove the sensor, using a small screwdriver.
Note
|
To facilitate fitting a new sensor, coat the hole in the rubber
flange with a little petroleum jelly (Vaseline). Then use a screwdriver
to raise the groove in the rubber duct, enabling the sensor's flange to
be introduced into the groove. Then press inwards hard while
simultaneously twisting the sensor round.
|
|
Unplug the connector and undo the two hose clips. Remove the mass
air flow sensor.
Fit in reverse order.