Replacement of TCS controlmodule
|
|
Replacement of TCS control
module
|
The TCS control module is located under the right-hand front seat behind the
cross-member, where it is secured by means of a fixing clamp.
|
1.
|
Expose the control module by
removing the right-hand front seat (four bolts).
Unplug the connector for heating/ adjustment/ belt warning and place the seat on the
rear seat.
|
|
2.
|
Remove the sill scuff plate and fold back the carpet.
|
|
3.
|
Remove the plastic nut securing the clamp to the scuff plate, press in the shank
and fold up the console.
|
|
4.
|
Note the position of the wiring and remove the control module.
|
When refitting, make sure that the wiring is correctly positioned.
Program the control module for the gearbox in question, see
In other respects, refit in reverse order.
