SAAB WIS ONLINE

Adjustment of throttle plate

Adjustment of throttle plate



1. Take off the engine cover.

2. Disconnect the turbo delivery pipe from the throttle body.

3. Check the setting of the throttle plate.

4. Adjust if necessary by undoing the 2 screws and then moving the mount in the desired direction.

5. Fit the delivery pipe and cover.

Warning

After replacing the throttle position sensor, adjusting the throttle position or replacing the ECM on cars equipped with the Saab clutch control module, the throttle position must be adapted before the car can be driven. Ignition switched on. Connect an ISAT scan tool and contact Trionic. Select the "IDLING ADAPTATION" command on the "ACTIVATE" menu (do not touch the accelerator pedal). Select the "IDLING" command on the "READ ON/OFF" menu. The ISAT must show "YES" when the accelerator pedal is not pressed.