SAAB WIS ONLINE

Command menu ACTIVATE

Command menu ACTIVATE

ISAT display

Function

INJECTORS

This command has a submenu as follows: • INJECTOR CYL 1 • INJECTOR CYL 2 • INJECTOR CYL 3 • INJECTOR CYL 4 The injector concerned is activated for 10 seconds at a frequency of 10Hz

IGNITION COILS

This command has a submenu as follows: • IGNITION COIL CYL 1 • IGNITION COIL CYL 2 • IGNITION COIL CYL 3 • IGNITION COIL CYL 4 The ignition coil concerned is activated for 10 seconds at a frequency of 200 Hz

SOLENOID VALVE

The BPC (APC) solenoid valve is activated for 10 seconds at a frequency of 90Hz

IAC VALVE

The idle air control (IAC) valve is activated for 10 seconds with a current of 0.6A

EVAP VALVE

The purge valve (EVAP valve) is activated for 10 seconds at a frequency of 8Hz

OXY SENSOR PREHEAT

The oxygen sensor preheater is activated for 10 seconds

AC RELAY

AC relay/compressor is activated for 10 seconds at a frequency of 1 Hz

Malfunction indicator lamp

The malfunction indicator lamp (CHECK ENGINE) is activated for 10 seconds at a frequency of 1Hz

SHIFT-UP LAMP

The SHIFT UP lamp is activated for 10 seconds at a frequency of 1Hz

FUEL PUMP RELAY

The fuel pump relay is activated for 10 seconds at a frequency of 1Hz

MAIN RELAY

The main relay is activated for 10 seconds at a frequency of 1Hz

IDLING ADAPTATION

This command is used in the forced adaptation of the throttle position during idling

RESET BOOST PRESSURE

This command is used for resetting boost pressure adaptation