ICE electronic controlmodule
|
|
ICE electronic control
module
|
|
1.
|
Remove the cover of the main
fuse box on the side of the dashboard.
|
|
2.
|
Remove the knee shield above the pedal assembly.
|
|
3.
|
Lift out the air duct to facilitate access to the relay holder behind it.
|
|
4.
|
Remove the screw securing the relay holder and press the holder down.
The ICE module is mounted above the relay holder.
|
|
5.
|
Fit in reverse order.
|
Important
|
|
After a control module has been replaced, the new control module will have to be
programmed, see
.
|
|
|
|
|
1.
|
Remove the cover of the main
fuse box on the side of the dashboard.
|
|
2.
|
Remove the knee shield above the pedal assembly.
|
|
3.
|
Undo the screws securing the relay holder.
|
|
4.
|
Push the relay holder aside.
The ICE control module is mounted behind the relay holder.
Fit in reverse order.
|
