Interior lighting, front reading lamps
|
|
Interior lighting, front reading lamps
|
|
1.
|
In the event of a fault in any
individual lamp, check the fuse and the bulb.
|
|
2.
|
Unplug the switch from the interior lighting connector and ground pins 1 and 3.
|
|
3.
|
If the lamps do not light up, check the wiring between the fuse and the lamps,
and also between the lamps and the switch, for continuity/shorting.
|
|
4.
|
Connect a jumper lead between pins 4 and 1 of the switch connector and also
between pins 5 and 3. If the lamps light up, change the switch.
|
|
5.
|
Check the wiring between pin 4 of the switch connector and pin 23 of the ICE
module, and also between pin 5 of the switch connector and pin 46 of the ICE module, for
continuity/ shorting.
|
